Rough Sawn Ambrosia Maple Pack

CA$80.00

Our packs of rough sawn lumber will include 5 layers of wood that will measure a minimum of 8” wide. Each layer will be made up of 1 or 2 boards to equal the min. 8” width.

The thickness of our rough sawn lumber measures approximately 1-1/16” this provides lots of material to flatten and plane your lumber to meet the target finished thickness of 3/4”.

The length of the boards in this package is 36” long.

This wood has been kiln dried to an average of 6-8%. The wood you receive will be predominantly clear with some small solid knots present.

If you do not have a planer and or would rather work with fully milled lumber. Check out our S4S lumber packs.

The pictures you see here is an example of the boards you receive.

Our packs of rough sawn lumber will include 5 layers of wood that will measure a minimum of 8” wide. Each layer will be made up of 1 or 2 boards to equal the min. 8” width.

The thickness of our rough sawn lumber measures approximately 1-1/16” this provides lots of material to flatten and plane your lumber to meet the target finished thickness of 3/4”.

The length of the boards in this package is 36” long.

This wood has been kiln dried to an average of 6-8%. The wood you receive will be predominantly clear with some small solid knots present.

If you do not have a planer and or would rather work with fully milled lumber. Check out our S4S lumber packs.

The pictures you see here is an example of the boards you receive.

Ambrosia Maple is very unique and attractive wood. Also called Wormy Maple the district dark streaks in this wood are actually created by a small beetle. The Ambrosia beetle barrows into the wood to lay its larva. The beetle introduces a fungus in the wood that creates those long distinct worm like patterns.

This lumber in this order will be predominantly clear with some small solid knots possible.